PROVIDING MAINS PRESSURE HOT WATER
PROVIDING MAINS PRESSURE HOT WATER
Mains Pressure Instantaneous Water Heater
Mains pressure systems offer many benefits over conventional gravity-fed systems including mains pressure hot water to all taps, power shower performance, and a dry roof space, with no need for tanks or pipes in the loft.
Quality Water
– With no cisterns in the loft, the whole roof space can be insulated, increasing the thermal efficiency of the home.
Microwave Boiler – The Ultimate Mains Pressure System
In its simplest terms, a microwave boiler instantaneous water heater is simply a more efficient way to heat and deliver hot water all around the home. As with conventional boiler systems, there is a boiler to heat water, But that’s where the similarity ends. There is no requirement for a cylinder to store hot water or its associated plumbing.
In a BoilerWave system, the water for taps and showers is supplied from the mains water supply, this water is heated by a highly efficient plate heat exchanger and then goes on to the taps and showers – still at mains pressure, similar to a gas combi boiler.
So it is the BoilerWave that heats the water for the taps. This offers tremendous benefits:
– The boiler operates at 98% peak efficiency. Ensuring an instantaneous water temperature with a 26L per/minute flow rate @ 40°c ∆T. The demands on the boiler are such that stop/start cycles are greatly reduced, producing savings in running costs.
Introducing BoilerWave Instantaneous Water Heater Microwave Boilers
And the advantages of BoilerWave Instantaneous Microwave Boiler systems go much further:
– By utilising heating or hot water on demand, reduces overall energy consumption and costs.
– Our MicroWave Boilers are factory-fitted with all the necessary pipework and electrics set at the front of the unit. This significantly reduces labour time on-site and helps to reduce installation costs.
– Controls are simplified as hot water programming is no longer necessary.
– BoilerWave systems contain less than 15 litres of secondary water and therefore do not need to comply with G3. The installer need not be registered, giving greater flexibility.
Benefits of BoilerWave
– Ultra-high performance providing instantaneous water heater and heating and thus reducing wastage
– ‘Power shower’ pressures for every shower in the home
– The capability to provide high simultaneous demands, to serve different locations at the same time
– No cisterns or pipes in the loft, so no need to worry about freezing pipes in the winter
– Quality, potable water at every tap
No Requirements For
– Motorised valve and boiler bypass
– Pressure or temperature safety relief valves
– Separate external feed cistern for domestic hot water
– Shower pump – thanks to excellent hot water performance from the mains